6-POLE, 12/24 VOLTS, 35 AMPS. BRASS SPLIT-PIN CONTACTS ARE ALIGNED TO ASSURE PROPER CONTACT AND MINIMAL VOLTAGE DROP. SPRING-LOADED SOCKET DOORS, PLUG

SCREW TERMINALS ACCEPT UP TO 12 AWG WIRE. TWO MOUNTING HOLES ON THE FLANGE 17/64" (6.7MM) DIAMETER, 2 15/16" (74.6MM) ON CENTERS. MOUNT THROUGH 1 3/8"

COLE HERSEE BRAND

4-POLE, 12/24 VOLTS, 35 AMPS. BRASS SPLIT-PIN CONTACTS ARE ALIGNED TO ASSURE PROPER CONTACT AND MINIMAL VOLTAGE DROP. SPRING-LOADED SOCKET DOORS, PLUG

SCREW TERMINALS ACCEPT UP TO 12 AWG WIRE. TWO MOUNTING HOLES ON THE FLANGE 17/64" (6.7MM) DIAMETER, 2 15/16" (74.6MM) ON CENTERS. MOUNT THROUGH 1 3/8"

COLE HERSEE BRAND

4-POLE, 12/24 VOLTS, 20 AMPS. BRASS SPLIT-PIN CONTACTS ARE ALIGNED TO ASSURE PROPER CONTACT AND MINIMAL VOLTAGE DROP. SPRING-LOADED SOCKET DOORS, PLUG

SCREW TERMINALS ACCEPT UP TO 12 AWG WIRE. TWO MOUNTING HOLES ON THE FLANGE 17/64" (6.7MM) DIAMETER, 2 15/16" (74.6MM) ON CENTERS. MOUNT THROUGH 1 3/8"

DIE-CAST SHELL, UNSEALED, BRASS TERMINAL PINS FOR BEST CONDUCTIVITY

ACCEPTS UP TO 12 GAUGE WIRE, (2) 6.4MM MOUNTING HOLES, 73.1MM APART ON CENTER

POLLAK BRAND

DIE-CAST SHELL, WEATHER SEALED, WIRE INSERTION STYLE SOCKET, SOLID BRASS TERMINAL PINS

ACCEPTS 12-8 GAUGE WIRE, (2) 9MM MOUNTING HOLES, 76.2MM APART ON CENTER

POLLAK BRAND

DIE-CAST SHELL, WEATHER SEALED, WIRE INSERTION STYLE SOCKET, SPLIT BRASS TERMINAL PINS

ACCEPTS 12-8 GAUGE WIRE, (2) 9MM MOUNTING HOLES, 76.2MM APART ON CENTER

POLLAK BRAND

GLASS-FILLED NYLON SHELL, WEATHER SEALED, WIRE INSERTION STYLE SOCKET, SOLID BRASS TERMINAL PINS

ACCEPTS 12-8 GAUGE WIRE, (2) 9MM MOUNTING HOLES, 76.2MM APART ON CENTER

POLLAK BRAND

GLASS-FILLED NYLON SHELL, WEATHER SEALED, WIRE INSERTION STYLE SOCKET, SPLIT BRASS TERMINAL PINS

ACCEPTS 12-8 GAUGE WIRE, (2) 9MM MOUNTING HOLES, 76.2MM APART ON CENTER

POLLAK BRAND

7-POLE RV CAR-END SOCKET, PLATED STAINLESS STEEL CASING

ACCEPTS 14-10 GAUGE WIRE

POLLAK BRAND

7-POLE RV CAR-END SOCKET, PLASTIC CASING

ACCEPTS 14-10 GAUGE WIRE

POLLAK BRAND

9-POLE RV CAR-END SOCKET, PLASTIC CASING

ACCEPTS 14-10 GAUGE WIRE

POLLAK BRAND

DIE-CAST SHELL, WEATHER SEALED, WIRE INSERTION STYLE SOCKET, SPLIT BRASS TERMINAL PINS

ACCEPTS 12-8 GAUGE WIRE, (2) 9MM MOUNTING HOLES, 76.2MM APART ON CENTER

POLLAK BRAND, BEST VALUE

TWO-POLE BREAKAWAY UNIT: PLUG AUTOMATICALLY RELEASES AT APPROXIMATELY 20LBS PULL. MATE WITH ALL CONNECTORS OF COMPARABLE DESIGN. POLARIZED. 20A MAXIMU

INTEGRAL MOUNTING BRACKET WITH TWO .218" (5.6MM) DIAMETER MOUNTING HOLES, 1.25" (31.8MM) ON CENTERS.

COLE HERSEE BRAND

6-POLE TRAILER SOCKET, DIE-CAST CASING, RUBBER BOOT PROTECTS REAR OF SOCKET

TWO 1/4" MOUNTING HOLES. 2-7/8" ON CENTER. MOUNTS THROUGH 1-3/8" HOLE

POLLAK BRAND